How Wigs are made?

The use of wigs a has greatly increased in recent times. The main reason being that wigs used to be worn for either prosthetic or cosmetic reasons earlier and occasionally in special acts or parties. But the use of wigs has changed to some extent and it is also being use for convenience reasons by many people across the globe who short for time.

There are many people who simply do not have the time to spend hours at a hair stylist, having their hair styled. Using pre-styled wigs is a very good option for them. Have you ever wondered how much effort into the making of these wigs.

Preparing the hair:

The manufacturing process of the hair is quite a lengthy one indeed. There are many factors to consider and a lot of work involved as better explained in short below:

• To start with all the hair must be lying in the same direction. The method to detect this is quite simple although time consuming. You need to hold a bunch of hair in your hand and rub the ends between the fingers and thumb. The tips will turn back while the cut ends will lie straight. The important things is that if you do find hair strands running in opposite directions you need to sort them out in to two different piles prior to making a bunch.
• Then length of the hair is also another factor to consider. They are all made uniform in a suitable size and the unusable hair is discarded. After which the hair is tied in small bundles not very tightly though.
• The hair also needs to be inspected for nits and if found it will be treated in an appropriate manner by boiling the hair in acetic acid and also combing it through a steel toothed nitting machine.
• At this stage the hair needs cleaning and hence is washed in soapy water along with a disinfectant after which it is dried.
• They then need to be straighten and sorted by size and made ready for use in making a wig. In addition to which the hair can now be styled as desired as curled or waved or whatever you desire. It is yet again boiled after being styled and then made to dry in a warm oven for over 24 hours.
• This is when the customizing process occur if it is a special wig being manufactured. It can be styled and bent in a special way so that you have that perfect fit.

Preparing the pattern:

If a pattern needs to be prepared on the basis of the customers head structure special effort is required a explained here:

• The aim is to provide the perfect fit with these customized wigs, thus the foundation of such wigs are made as close as possible to the head of the client. This can be done either by directly taking measurements or by using a cast of the head as a model.
• The important measurements to take are, the circumference is measured about half an inch above the hair line, at the nape of the neck as well as above each ear and finally across the front of the head.

Making the foundation:

The next process requires for the foundation to be made as explained here:

• The making of the foundation is different from the other process. The foundation is actually cut from fine mesh silk netting that goes with the hair color. The size of the silk netting can vary although it is a small variation. The crown of the foundation is made from either silk, cotton or nylon and is cut from a coarser net. At times a portion of this is also incorporated into the wig itself.
• The pattern that would have been prepared is placed on the wooden head shaped form.  The net foundation is then brought together on the block by means of sewing them to pieces of gallon. Usually cotton thread is used in he process.
• In addition to which springs are inserted at strategic locations of the foundation which aid in holding the completed wig in place. They are usually made from steel or elastic bands.

Knotting:

• The procedure of attaching the hair to the net foundation is called knotting.  There are a few different methods of doing this however the single or the 'full V'  knot is the most common one. This knot is similar to that used making a latch hook rug. 
• Although if this knot is used the size of the hair that can be utilized is also fixed and cannot change. A complete full wig takes up to 30,000 to 40,000 knots and consumes up to 40 hours. The wig is then mounted wrong side and stuffed with saw dust. The inner surface of the wig need to be pressed with a hot iron to secure the knots.

Styling:

The process of styling the wig takes place once the wig is completed. It is gently dampened and combed using a wet comb. The wig can thus be styled as per requirements  after which it is covered with a net and dried in a warm oven.

About Company : Elevatestyles Corporation specializes in African American wigs such as Beshe Lace Wig Drew, Lace 31 and Wet N Wavy Jerry Curl Styles that are kinky curly and absolutely beautiful.

Get more information about wigs visit - www.elevatestyles.com or email us on -customerservice@elevatestyles.com or call on - (888)676-2226.

If you like this blog, please Plus it, Like it, Tweet it, or best yet, link to it.

Head Circumference (Wig Sizes) - How Do I measure My Head Size?

Modern people, especially ladies love wearing wigs for special occasions or for medicinal reasons. They face the most important issue – how to measure head for wig size. Most wigs nowadays come in ‘one size fits all’ model that might not fit everyone’s head size. Head size measurement is necessary, especially for large size wigs and here we provide you with a wear size guide on wigs.

Measurements are asked for custom lace wigs however, it will be helpful for all. If you are purchasing wig online, then taking correct measurement of your head is necessary to fit the unit well. Before measuring your head, you need to keep certain things in hand.

• Get a cloth measuring tape and put around your head. Take down the measurements and next, prep your hair. 
• Keep in mind your style of wearing such as braiding hair under the lace wig, because you have to measure size according to the style.
• Keep the tape close to the skin but not pressing tightly as it may cause your lace wig to cut into your skin or suppress circulation. 
• Circumference is taken to know the distance from the center of your front hairline to your entire head. 
• Ensure that the tape goes above your ear and leaves at the nape of your neck. 
• Include baby hairs while measuring and avoid single strands that are unimportant. 

6 type measure of circumference of head for the right wig size 

1.The Circumference of the Head:

This includes measurement of all around the head. Put tape at the edge of the hairline to get the measurement around the head and nape of the neck.

2.Measuring front to nape:

• This is important in head size measurement to know the length of head for the lace wig. The distance from your hairline to the nape of neck will be measured. 
• Perhaps you are not sure about the place your nape of neck extends to. Bend back your head until you feel a small crease and the place where your neck creases is the exact nape of your neck. 
• This place will have a unique line with baby hairs. When you take measurement, bend down your neck looking at your feet so that you can get the skin on neck stretched. 
• Put the tape at the center of front hairline and pull right above the top of head. This measurement will include your front hairline, crown of the head and the nape of your neck. 

3.Ear to ear around forehead:

Hold the tape at your temple ahead the ear. Bring the tape upward around 1.5” behind the hairline throughout and then move to the other temple of the ear. When you take this measurement, keep in mind whether you are using specs or sunglasses. 

4.Ear to ear around top of head:

This is taken to know the top of lace wig base. Hold tape at the top corner of your ear and move around the top of head to the other top corner of other ear. This should fit when you put headphones. 

5.Temple to temple over the back of head:

Put the tape at your hairline over the temple area. Ensure that it is in line with your eyebrow. Extend the tape over the back of head to the other temple.

6.Nape of the neck:

This is the final measurement of head for custom lace wig. Get the width of your nape as you may like wearing full lace wigs in the future. Put the tape at one side of nape and move around to the other corner a few inches away.

Wig Size	Circumference	Head Length	Head Width
Petite (P) /Extra Small (XS)	20 3/4 inches	13 1/4 inches	10 3/4 inches
Small (S)	21 1/4 inches	13 3/4 inches	11 inches
Average (A)/Medium (M)	22 inches	14 1/4 inches	11 1/2 inches
Average to Large (A/L)	22 1/2 inches	14 3/4 inches	11 3/4 inches
Large (L)	23 inches	15 inches	12 inches
Extra Large (XL)	24 inches	15 3/4 inches	12 1/2 inches

Thus, you have taken all measurements of your head. Do it two more times to ensure that it is right. Once you get the precise and constant measurement, go for buying your ideal custom lace wig.

About Company : Elevatestyles Corporation specializes in African American wigs such as Beshe Lace Wig Drew, Lace 31 and Wet N Wavy Jerry Curl Styles that are kinky curly and absolutely beautiful.

African American natural full lace wigs can help you achieve a beautiful natural hair wig style. We specializes in natural wig styles such as Beshe Lace Wig Drew, Lace 31 and Wet N Wavy Jerry Curl Styles that are kinky curly and absolutely beautiful.